proFPGA Interconnections Boards & Cables

profpga_a-i-pcie3-8_kitsmall__120x120.png

proFPGA PCIe gen3 8-lane Kit

This kit contains all required components to prototype and verify user designs, which have a PCIe gen3 interface. kit consists of a proFPGA PCIe gen3 8-lane daughter card, which will be plugged on a free extension site of the proFPGA FPGA Module, which provides the required high speed serial transceivers (MGTs), 1x PCIe gen3 8-lane host interface card and a dedicated high performance cable.

More information >>

profpga_a-i-sata_small__120x120.png

proFPGA SATA Interface Board

The proFPGA SATA Interface Board occupies one extension site of the proFPGA system and provides 8 channels which run up to 12.5 Gbps on 8 SATA connectors (4x HOST, 4x DEVICE) and which support SATA Host and Device connections. The board offers Pericom PI3EQX1204 SATA redrivers to enable a flexible high speed connection using SATA cables with a lengh of up to 1 m and more.

More information >>

profpga_a-i-dvi_small__120x120.png

proFPGA DVI Interface Board

The proFPGA DVI Interface Board occupies one extension site of the proFPGA system and provides 1x DVI Transmitter (TI TFP410) and 1x DVI Receiver (TI TFP403) and runs with up to 165 MHz pixel rates (including 1080p and WUXGA @ 60 Mhz). Further the board provides 8x general purpose LEDs and one Mictor-38 debug connector.

More information >>

profpga_a-i-mipi_small__120x120.png

proFPGA MIPI Interface Board

The proFPGA MIPI Interface Board occupies one extension site of the proFPGA system and provides 2x camera interfaces, each with one clock lane and up to four data lanes which offer transfer rates of up to 2.5 Gbps (HS mode) and 20 MBps (LPDT mode). Further the board provides 8x GPIO, I2C, and a reference clock is available for each camera Interface and one proFPGA top connector to make unused I/Os available.

More information >>

profpga_a-i-qsfp_small__120x120.png

proFPGA QSFP Interface Board

The proFPGA QSFP Interface Board occupies one extension site of the proFPGA system and provides 2x QSFP+ connectors. Further the board provides a programmable clock generator for MGT_REFCLK pins, a fixed frequency clock generator (100 MHz) for MGT_REFCLK pins and one proFPGA top connector to make unused IOs available.

More information >>

profpga_a-i-geth_small__120x120.png

proFPGA Gigabit Ethernet Interface Board

The proFPGA Gigabit Ethernet Interface Board occupies one extension site of the proFPGA system and pro- vides two Gigabit PHYs supporting 10M/100M/1G and MMI/GMI/RGMII. Further the board provides 5x status LEDs per PHY (duplex, 1G, 100M, 10M, activity) and one proFPGA top connector to make unused FPGA signals available.

More information >>

profpga_a-i-usb2_3small__120x120.png

proFPGA USB 2.0 & 3.0 Interface Board

The proFPGA USB 2.0 & 3.0 Interface Board occupies one extension site of the proFPGA system and provides two USB ports. One USB port is available through a mini USB connector and is connected to a USB3250 (Microchip). The USB3250 is a hi-speed USB device transceiver with UTMI interface. This USB port can be used to implement a USB 2.0 device in the FPGA with UTMI interface.

More information >>

profpga_i-usb_3_small__120x120.png

proFPGA USB 3.0 Interface Board

The proFPGA USB 3.0 Interface Board occupies one extension site of the proFPGA system and provides two USB 3.0 A female connectors which can be used either in host or in device mode. The USB 3.0 connection is provided with the TUSB1310A from Texas Instruments.

More information >>

© EGARA-CMS ist ein urheberrechtlich geschütztes Produkt der DREIWERKEN GmbH - Ihrer Werbeagentur für Online- und Print-Medien aus Kolbermoor (bei Rosenheim).